Coffre-fort Deziel inc.

Sargent & Greenleaf

1. Turn the dial to the left (counterclockwise) and stop when the first digit is aligned with the guide mark for the fourth time.
2. Turn the dial to the right (clockwise) and stop when the second digit is aligned with the guide mark for the third time.
3. Turn the dial to the left (counterclockwise) and stop when the third digit is aligned with the guide mark the second time.
4. Tournez lentement le cadran à droite (clockwise) until the dial blocks.

The opening marker is a symbol located at the top of the dial line or cross-shaped

Lagard (Mecanics)

1. Turn the dial to the left (counterclockwise) and stop when the first digit is aligned with the guide mark for the fourth time.
2. Turn the dial to the right (clockwise) and stop when the second digit is aligned with the guide mark for the third time.
3. Turn the dial to the left (counterclockwise) and stop when the third digit is aligned with the guide mark the second time.
4. Tournez lentement le cadran à droite (clockwise) until the dial blocks.

The opening marker is a symbol located at the top of the dial line or cross-shaped

Ulix (Electronics)

However if you have a delay opening once it is expired. Here's another section to add in the tips and Advice

You must enter the code again and then turn the small central turnstile.

LaGard (Electronics)

1. Enter the number 1 - 2 - 3 - 4 - 5 - 6 (company code),
2. 2 beeps are heard, and then turn the handle to open the safe.

Mass Hamilton (Electronics)

LaGard Redundant (Electronics)

1. Enter your current combination of six (6) digits.
2. The safe will show the validity of the combination with a double beep.
3. Wait four (4) seconds, and turn the handle.
4. Pull the handle to open the door

Valid code : you will hear two beeps after entering the six (6) digits.
Invalid code : you will hear three beeps.

Download the document constructor, click here

LaGard Redundant (Mecanics)